Technical Data

• Effective diameter of drive pinion10.18 mm
• Size45
• Stroke10 mm … 50 mm
• Stroke reserve0 mm
• Piston rod threadM6
• Toothed-belt stretch0.31 %
• Toothed-belt pitch2 mm
• Mounting positionoptional
• Piston-rod endMale thread
• Type of motorStepper motor
• Position detectionMotor encoder
• DesignElectric cylinder With toothed belt With integrated drive
• Symbol00997342
• Protection against torque/guideWith plain-bearing guide
• ReferencingPositive fixed stop block Negative fixed stop block
• Rotor position sensorAbsolute single-turn encoder
• Rotor position sensor, encoder measuring principleMagnetic
• Temperature monitoringSwitch-off for excessive temperature Integrated precise CMOS temperature sensor with analogue output
• Additional functionsUser interface Integrated end-position sensing
• DisplayLED
• Ready status indicationLED
• Max. acceleration9 m/s²
• Max. speed0.44 m/s
• Speed “Speed press”0.02 m/s
• Repetition accuracy±0.05 mm
• Features of digital logic outputsConfigurable Not galvanically isolated
• Duty cycle100%
• Insulation protection classB
• Max. current digital logic outputs100 mA
• Max. current consumption3000 mA
• Max. current consumption, logic0.3 A
• Nominal voltage DC24 V
• Nominal current3 A
• Parameterisation interfaceIO-Link User interface
• Rotor position transducer resolution16 bit
• Permissible voltage fluctuations+/- 15%
• Power supply, connection typePlugs
• power supply, connection systemM12x1, T-coded according to EN 61076-2-111
• Power supply, number of pins/wires4
• Power supply, connection pattern00995989
• ApprovalRCM trademark
• KC markKC-EMV
• CE mark (see declaration of conformity)To EU EMC Directive In accordance with EU RoHS Directive
• CE marking (see declaration of conformity)To UK instructions for EMC To UK RoHS instructions
• Vibration resistanceTransport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
• Shock resistanceShock test with severity level 1 to FN 942017-5 and EN 60068-2-27
• Corrosion resistance class CRC0 – No corrosion stress
• LABS (PWIS) conformityVDMA24364 zone III
• Storage temperature-20 °C … 60 °C
• Relative air humidity0 – 90%
• Degree of protectionIP40
• Protection classIII
• Ambient temperature0 °C … 50 °C
• Note on ambient temperaturePower must be reduced by 2% per K at ambient temperatures above 30°C.
• Impact energy in end positions0.003 J
• Max. moment Mx0 Nm
• Max. moment My0.4 Nm
• Max. moment Mz0.4 Nm
• Max. feed force Fx85 N
• Reference value effective load, horizontal5 kg
• Reference value effective load, vertical2.5 kg
• Feed constant32 mm/U
• Reference service life50 km … 500 km
• Maintenance intervalLife-time lubrication
• Moving mass95 g … 282 g
• Moving mass for 0 mm stroke83 g … 199 g
• Additional moving mass per 10 mm stroke4.55 g … 16.61 g
• Product weight802 g … 1196 g
• Basic weight for 0 mm stroke775 g … 1001 g
• Additional weight per 10 mm stroke29 g … 42 g
• Number of digital logic outputs 24 V DC2
• Number of digital logic inputs2
• Specification logic inputBased on IEC 61131-2, type 1
• Working range of logic input24 V
• Features of logic inputConfigurable Not galvanically isolated
• IO-Link, SIO-Mode supportYes
• IO-Link, Protocol versionDevice V 1.1
• IO-Link, communication modeCOM3 (230.4 kBaud)
• IO-Link, Port classA
• IO-Link, Number of ports1
• IO-Link, Process data length OUT2 bytes
• IO-Link, Process data content OUTMove in 1 bit Move out 1 bit Quit Error 1 bit Move intermediate 1 bit
• IO-Link, Process data length IN2 bytes
• IO-Link, Process data content INState In 1 bit State Out 1 bit State Move 1 bit State Device 1 bit State Intermediate 1 bit
• IO-Link, Service data INSpeed 32 bit Position 32 bit Force 32 bit
• IO-Link, Min. cycle time1 ms
• IO-Link, Data storage required500 Byte
• Max. cable length15 m outputs 15 m inputs 20 m with IO-Link® operation
• Switching logic for outputsNPN (negative switching) PNP (positive switching)
• Switching logic for inputsNPN (negative switching) PNP (positive switching)
• IO-Link, connection technologyPlugs
• Logic interface, connection typePlug
• Logic interface, connection technologyM12x1, A-coded according to EN 61076-2-101
• Logic interface, number of pins/wires8
• Logic interface, plug pattern00992264
• Type of mountingWith through-hole Via female thread Via centring sleeve With accessories
• Note on materialsRoHS-compliant
• Material coverAnodised wrought aluminium alloy
• Material housingAnodised wrought aluminium alloy
• Material piston rodHigh-alloy stainless steel
• Material toothed beltPolychloroprene with glass fibre